Verktøy

Holder for buen, når du skal arbeide med den.

The Bowsmith is the ultimate archery tool kit. Designed specifically for the technical needs of bow hunters and target shooters, the Bowsmith™ packs an array of archery-specific tools into one frame. It is a very versatile archery tool. Without compromising effectiveness, target shooters and hunters can now carry just one tool to tune, maintain or repair bows, arrows and broadheads in the field or at the range.

The tool features sheath, broadhead wrench, pry tip, screw driver, peep sight string spreader, knife, Threaded adapter and 8/32 inch Threaded Extractor. It also features Arrow prep Brass brush, Broadhead Sharpener, Crosscut Arrow End file, fletching glue stripper, three step starter, needle nose pliers, nock spreader, string loop and Nock Crimp/cutters. It has 7 double ended bit Kit (14 in total) including magnetic 1/4" hex drive.

T6, T7, T8, T9, T10, T15, T20, T25

The EZ Press was designed for quick and easy set-up of all compound bows.* The manual components are machined for smooth and easy operation. The manual version is required for higher draw weight bows over 70 lbs.
 
* There are 2 compound bows that require limb adapters: the Bear Attack and the Bear Carnage
 * This press comes with bench mounts.

The Arctec Tiefa Press is a solid and heavy duty workstation. The modular system combines the most needed tools for professional bow tuning in one product.

Key features:
Suitable for bows and crossbows
Optional with floor stand or table mount
Fast movable sled with quick lock
Build out of 3mm steel
Highest quality standard made in Germany

Specifications:
Minimum traversing distance: 5"
Maximum traversing distance: 66"
Four 1/2" inch thick steel pressing fingers.
Every finger is separately adjustable for any limb width.
Slidable pressing support with quick locks for fast changes between different bows with different ATA lengths.

'Split-limb' adapter for pocket press. Bør benyttes uansett lemtype.

This compact, light weight bracket provides a quick and easy attachment point for the Bowmaster Bow Press. The L design presses from the limb tips and compress the limbs in much the same way as when the bow is drawn. This new design works on a wide variety of bows, including those up to 6º past parallel. They work equally well on both solid and split limb bows and also work on bows with flared limb tips.

The NEW Bowmaster G2 Split Limb L Brackets are longer than previous versions and are designed to fit large cams like those on the newer universal fit compound bows. Like the 2015 version of the Split Limb L Brackets the new G2 L Brackets will also work on bows up to 6 degrees past parallel.

The Split Limb L Brackets are available in 2 widths.  The standard width L Brackets will fit a maximum cam width of 3/4”, which will cover about 95% of the bows on the market.  The wide width will fit a maximum cam width of 1 1/8” which are intended for bows with wide cams.